Troubleshooting - Check Relay Operation

Operate brake lever to trigger relays 3 & 4 - LED's 3 & 4 should light up.

Check the operation of the relay module by operating either brake lever. The module should provide an audible 'click' and trigger relays 3 & 4 (illuminating green LED's 3 & 4).

✔︎ Activate the brake lever and LED's 3 & 4 should light.

✔︎ Release the brake lever and LED's 3 & 4 should go out.

  • Does the brake lever operate LED's 3 & 4 properly?
Yes (Normal) Click Here
No (Abnormal) Click Here

 

⚠️  If the LED's are lit and don't extinguish when the brake lever is released, there is a problem. Click 'No' above.